Stationary Flat Tops
Stationary Flat Tops
Type-A (Screw Type / Slot Type)
Sanmit Products Fit For All 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | LC 300 (SFD - Front & SFL - Back) , 300A (SFL - Back Side ) & 333 (Under Licker - in) |
| 2 | D-K760 , D-K760 - old, D-K780, D-K800 & D-K803 (Existing 3 Flat C-System) |
| 3 | D-K803 & D-K903 (Under Licker - in Segments) |
| 4 | Sanmit C - System for all cards (Screw type) |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production there by increasing productivity.
Long service life and greater added value.
Made out of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stability.
To achieve perfect gauging and long life.
Sanmit Products Fit For All 60" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | INGOLSTADT - SSKU12 |
| PPSI |
|---|
| FD 90 A |
| FD 150 A |
| FD 250 A |
| FD 350 A |
| FD 450 A |
| FD 550 A |
| FD 650 A |
Stationary Flat Tops
Type-B (Screw Type / Slot Type)
Sanmit Products Fit For All 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | D-K715, D-K740, D-K760 (Aluminium Base), D-K800 (Twin Flat), D-K803 (Twin Flat),D-K903, T-C 03 / 05 / 06 / 07-S / 08 / 11 / 15 & All Twin Flat System Carding Machines |
| 2 | MK - 4, MK - 5, MK - 5A, MK - 5B, MK - 5C, MK - 5D & MK - 6 & MK - 7 |
| 3 | C.1/2, C.1/2a, C.1/3, T.C.360, I.C.C T.C 450, C 4, C 10, C 50 & C 51 |
| 4 | HOWA - CMSK - 3, CMSK - 4 & CMSK - 5, CM300 & CMS80 |
| 5 | TOYODA & TOYODA MEIKIN All model |
| 6 | JFA 186, JFA 201, JFA 203, JFA 203A, JFA 203B, JFA 212, JFA 225, JFA 226, JFA 227, JFA 228, JFA 231C, JWF 1203 JWF 1204 & all other CHINESE cards |
| 7 | I.C.C. - C - System & Under Licker - in Segments for all Carding Machines |
| 8 | JAPANESE All Carding machines |
| 9 | C 40, C 41, CX 300, CX 400, CX 501 & CX 601 (Front, Back & Under Licker-in) |
| 10 | Lc 361 & 363 Twin Flat (SFL/SFD) |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
Sanmit Products Fit For All 50" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | T-C 11 / 15 |
| 1 | Chinese JSFA 326 / 328A / JSC-6 Auto Card |
Sanmit Products Fit For All 60" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | C60, C61 & C70 / Chinese C601 |
| 2 | Marzoli C601 & C701 |
| 3 | LC 636 |
| PPSI |
|---|
| FD 90 A |
| FD 150 A |
| FD 250 A |
| FD 350 A |
| FD 450 A |
| FD 550 A |
| FD 650 A |
Stationary Flat Tops
Type-C (Slide Type)
Sanmit Products Under Lickerin Segments - Suitable For 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | D-K715, D-K740, D-K760, D-K780 & D-K800 |
| 2 | C.10, C.50 & C.51 |
| 3 | C.1/2, C.1/2a, C.1/3, 100, 300, 300A, 300A-V3, 300A-V4, 361, 363, T-C360, T-C450 & other 40" cards |
| 4 | JFA 186, JFA 201, JFA 203, JFA 203A, JFA 203B, JFA 212, JFA 225, JFA 226, JFA 227, JFA 228, JFA 231C, JWF 1203, JWF 1204 & other CHINESE cards |
| 5 | BLOW ROOM CVT - 3 & CVT - 4 (FD 40) |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 60 |
| FD 90 |
Stationary Flat Tops
Type-D (Slide Type)
Sanmit Products For UNIFLEX Carding Segment
| S.No | Sanmit Model |
|---|---|
| 1 | B 60(Uniflex) |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 4 |
Stationary Flat Tops
Type-E (Slide Type)
Sanmit Products Under Lickerin Segments - Suitable For 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | C 4 |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 60 |
Stationary Flat Tops
Type-F (Screw Type)
Sanmit Products Under Lickerin Segments - Suitable For 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | T-C03 / 05 / 5-3 / 06 / 07-S /08 /10 |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 90 |
Stationary Flat Tops
Type-G (Clip Type)
Sanmit Products Fit For All 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | MK-4 & MK-5 (Clip type C-System) |
| 2 | D-K715, D-K740 & D-K760 (Cast Iron & AI. C - System) |
| 3 | JFA 186, JFA 201A, JFA 201B, JFA 231A, JFA 221D, C - System & Chinese Cards |
| 4 | HOWA-CMSK 3 & CMS 80 / TOYODA-CK 7 & TOYODA MEIKIN |
| 5 | Clip Type C- System for all Carding Machines |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 90 A |
| FD 150 A |
| FD 250 A |
| FD 350 A |
| FD 450 A |
| FD 550 A |
| FD 650 A |
Stationary Flat Tops
Type-H (Threaded Type)
Sanmit Products Fit For All 40" Cards
| S.No | Sanmit Model |
|---|---|
| 1 | LC300A (Front - SFD) |
| 2 | LC300A-V3 (Front & Back) & LC 300A-v4(Front & Back) |
| 3 | LC 333/361 & 363 SFL=8f+2k SFD=4Flats/5 Flats |
| 4 | C.1/2, C.1/2a, C.1/3 & 100 (Front & Back) C-System and C-Factors for all Card |
| 5 | Sanmit C-System for SFL & SFD for C.1/3, 300, 300A, 300A-v3/v4. |
Salient Features:
It is a unique special process to remove carbon deposits associated with the manufacturing process.
Diamond gives silver clean, burr free finish that leaves the wire smooth and contamination free like a semi pinned shape.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Closer setting after initial wire mounting, as the wire is less aggressive which protects the fibre from damage.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
The card can put into full production thereby increasing productivity.
Long service life and greater added value.
Madeout of imported micro alloy Steel.
Suitable for all models.
More accuracy, cost economic, maintenance free, easy fit and dimensional stablity.
To achieve perfect gauging and long life.
| PPSI |
|---|
| FD 90 A |
| FD 150 A |
| FD 250 A |
| FD 350 A |
| FD 450 A |
| FD 550 A |
| FD 650 A |
Stationary Flat Tops
Type-K(Twin Row)
Original Cast Iron Underlickerin Segments
| S.No | Sanmit Model |
|---|---|
| 1 | D-K 715 / D-K 740 Cards |
Salient Features:
Aluminium end caps with extra locking punch holes ensures double safety for SF wires.
Scratch free Aluminium coating gives better aesthetic appearance.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
Long service life and greater added value.
| PPSI |
|---|
| FD 60 |
Stationary Flat Tops
Type-L (Slide Type)
ECC Underlickerin Segments
For
HOWA Cards.
Salient Features:
Aluminuim end caps with extra locking punch holes ensures double safety for SF wires.
Scratch free Aluminium coating gives better aesthetic appearance.
Burr free and smooth finish, protects the fibre from breakage as a more gentle carding action results highest yarn strength.
Higher nep removal efficiency and lower shot fibre content after the initial mounting and throughout the service.
Long service life and greater added value.
| PPSI |
|---|
| FD 60 |